If you’re looking for a way to run ethernet cable through walls, you’ve come to the right place. In this article, we’ll talk about what you need to do to get started, and give you some tips and tricks along the way. You’ll also learn how to create a cable concealer, so that you won’t have to worry about a big hole in your wall.
Identify the path of the cable
If you’re installing an Ethernet network in your house you’ll want to know how to identify the path of the Ethernet cable through walls. This will prevent your wires from getting tangled up and your ethernet network from being disrupted.
Fortunately, there are many different ways to go about figuring out how to identify the path of the Ethernet cable. You can choose from the traditional methods of determining where the cables originate from to the more technologically savvy methods of finding out where they go when they leave your abode. There are also some nifty tools that can do all three.
Image by Unsplash+
One such tool is a cleverly disguised multi-meter. Using the tool will help you figure out what the watts and milliwatts of the cable you’re plugged into are. Not only will it let you know how many watts are escaping through your walls, but it will also let you know how much ethernet you’re actually using.
Cut holes in the wall for an ethernet jack
If you are looking for a way to connect your home to a local area network, installing a network jack may be the right choice. Ethernet ports are commonly found on laptop computers, desktop computers, routers, modems, fax machines, printers, video game consoles, and more.
To install a network jack, you first need to determine where you want to place the jack. Depending on the layout of your room, you can use measurements to find the ideal spot.
Once you have decided on the location for your jack, the next step is to cut holes in the wall. Make sure that the holes are near your devices. This will ensure a safe cable run.
You should also be careful to avoid cutting into any electrical wiring. This can damage existing wires and conduits.
Before starting, you should also turn off power in your home. This will eliminate any possibility of an electric shock.
Create a cable concealer
A cable concealer is an ideal way to run ethernet cables through walls. It is easy to create, has an easy fix, and protects your cable from damage. You can paint it to match your room, or use adhesives to install it.
Cable concealers come in different sizes, styles, and colors. Some hide cables in the corner of a wall, while others allow you to run the cable along the baseboards of the room.
Image by Unsplash+
To begin the process of creating a cable concealer, you must first determine how many cables you need to run. This will help you decide how much space to set aside for the installation. Once you’ve decided, you’ll need to measure the area where you’ll be installing the cable.
For a small cable, you can use a nail-in clamp. This tool holds the wire to the wall and can be secured with a weighted string. If you’re running a long, round ethernet cable, you’ll want to buy U-shaped clips.
Install a jack
If you are installing a jack to run Ethernet cable through walls, there are several steps you should follow to ensure the installation is done properly. The process is straightforward and easy once you have the tools to get the job done.
To start, you should locate the jack in the correct location. You’ll want to have a clear route for running the cable. This means avoiding obstructions, such as water pipes, plumbing, or wiring. Using a bubble level will help you ensure the edges of the jack are parallel with the floor.
Next, you’ll need to decide on the type of jack. For outdoor use, choose a RJ45 jack. These jacks have a weatherproof design. They come with a faceplate that snaps onto the end of the cable.
After you’ve decided on the jack, you’ll need to drill a hole. You can use a hole saw or a spade bit to create a 7/8-inch hole. However, you don’t want to cut the hole too deep or the cable could be damaged.
